Primers
CEMPROVER
CEMPROVER Cement Primer is a liquid for use as primer for SNOWCEM PLUS application.
Special Features
- It is a primer for SNOWCEM PLUS.
- improves adhesive properties for certain difficult wall surfaces.
- provides a key for plastering to untreated concrete and smooth faced bricks .
SNOWCEM’S METAL (UG) PRIMER
SNOWCEM’S METAL (UG) PRIMER is specially formulated as priming coat for ferrous and non-ferrous metals.
Technical Details
| Nature | Liquid |
|---|---|
| Flexibility & Adhesion | Good |
| Colour | Redoxide |
| Finish | Smooth and uniform Finish |
| Covering capacity | 10 to 15 sq. metres per litre when spread at 25 to 30 micron DFT |
| Drying Time | Touch Dry – 30 minutes.Hard Dry – 4 to 6 hours (65% R.H./ 300 C) |
| Flash Point | 300 C |
| Resistance to salt spray for 96 hours | Good |
SNOWCEM’S SPECIAL (CW) PRIMER
SNOWCEM’S SPECIAL (CW) PRIMER is specially formulated as priming coat for both concrete as well as wooden surfaces.
Technical Details
| Nature | Liquid |
|---|---|
| Flexibility & Adhesion | Good |
| Colour | White |
| Finish | Smooth and uniform Finish |
| Covering capacity | 10 to 12 sq. metres per litre/coat |
| Drying Time | Touch Dry – 30 minutes.Hard Dry – 4 to 6 hours (65% R.H./ 300 C) |
| Recoating Period | 4 hours |
| Specific Gravity | 1.35 to 1.45 |
| Viscosity | 200-350 gm on stormer at 300 C |
SNOWSOL
SNOWSOL Stabilising Solution consists of an organic resin in a hydrocarbon solvent. It is used as a priming coat for SANDTEX MATT, Snowcryl XT, TRUMP and ALLROUNDER.
Special Features
- Stabilising Solution is an exclusive primer for SANDTEX MATT, Snowcryl XT, TRUMP and ALLROUNDER.
- has high penetrative qualities.
- is normally used for single coat applications.
- will control suction and will often avoid the necessity of costly alternative work.