Kamosilky Acrylic Washable Distemper has an exquisite collection of pastel & vibrant shades. It is based on Acrylic Emulsion to give a smooth aesthetic finish for interiors with slight sheen and a finish of silk.

Key Feature	Eco Friendly, Anti Fungal, Wide Range of Colour
Type	Water Base
Application	Kamdhenu Kamosilky Acrylic Washable Distemper can be applied by brush / roller / Spray.
Where to use	Internal Walls, Ceiling and other surfaces for beautification of homes and offices.
Packaging	20, 10, 5, 2 & 1 Kgs.

Surface Preparation :

• All new plaster should be allowed to dry for at least 3 to 5 months depending on the season.
• The surface should be completely free from previous coats of colour wash, lime, distemper, dirt, dust, oil and grease.
• Smoothen the surface by filling dents with thin coat of KamoGuard Acrylic Wall Smoothner and allow drying for 5 to 8 hrs.
• Sand the surface with emery paper 180 and apply one coat of Kamoprime Water based Cement Primer .

Direction For Use :

• Apply 2-3 coats of Kamosilky Acrylic Washable Distemper by thinning down with 1.5 – 2 parts of Distemper with one part of Water.
• Second coat should be followed after 3 hrs of air drying of 1st. coat, Under normal temperature & humidity.
• Universal Tinter can be used to get the desired shades.

Safety, Health & Environmental Information :

• Eco Friendly: Contains no added Lead, Mercury, Cadmium & Chromium compounds.
• Store the product at ambient conditions in a well ventilated location and away from the source of fire and ignition. Avoid eye & skin contact.
• Keep out of reach of children and away from food, drink and animal feed. Do not pour left over paint down the drains or in water courses.
• Avoid inhalation and wear eye protection during application.
• Remove splashes from skin with soap and water.

Bunty Acrylic Distemper is a specially formulated water thinnable wall paint based on emulsion to give smooth finish. Available in wide rang of colour.

Key Feature	Economical, Anti Fungal, Wide Range of Colour
Type	Oil Base
Application	By Brush or Roller
Packaging	20, 10, 5, 2 & 1 Kgs.
Area of application	Brick work, Concrete, Asbestos & Cement sheets.

Direction For Use :

• All new plaster should be allowed to dry for at least 3 to 5 month its depends on season.
• The surface should be completely free from pervious coats of colour wash, powder Distemper & also to be free from dirt, dust, oil and grease.
• Smoothen the surface by filling dents with thin coat of KamoGuard Acrylic Wall Smoothner and allow drying for 5 to 8 hrs.
• Sand the surface with emery paper 180 and apply one coat of Kamoprime Cement Primer Water Base.

Direction for Application :

• Apply 2-3 coat of Bunty Acrylic Distemper by thinning down with 1.5-2 part of Distemper with one part of water. Second coat should be followed after 3 hrs of air drying of 1st coat under normal temperature & humidity. Universal tinter can be used to get desire shades.

Safety, Health & Environmental Information :

• Eco Friendly: – Contains no added leads, mercury cadmium & chromium compounds.
• Store the product at ambient conditions in well ventilated location and away from the source of fire and ignition. Avoid eye & skin contact.
• Do not pour left over Paint down drains or in water courses.
• Avoid inhalation and wear eye protection during application.

Chota Bunty Pouch Distemper is a water based wall finish for interiors, which gives a smooth & beautifal look that lasts all year round.

Packaging size available :1 Kg